Driver Knowledge Tests Menu

A Shared Traffic Zone, where pedestrians and other road users can share the road safely has a speed limit of: A Shared Traffic Zone, where pedestrians and other road users can share the road safely has a speed limit of:

  • A. 10 Km/h.

  • B. 20 Km/h.

  • C. 50 Km/h.

  •  
    The correct answer is A
     
    Correct. Pedestrians will be using the road along with vehicles, therefore the speed limit is low - 10 km/h
     
 
 
 
 

New South Wales speed limits

40 kph limit pedestrian area sign

Speed limit signs are always a black number inside a red circle. In New South Wales the speed limits range from 10kph to 110kph in 10kph increments, but the majority of roads will either be 50kph in urban areas, 100kph in rural areas or 110kph on motorways and freeways.

Other territories have different speed limits (up to 130kph in Northern Territory) and different tolerances for exceeding the limit.

Within shared pedestrian zones the speed limit is as low as 10kph. Companies and individuals may place speed limit signs on their own property as low as 5kph, but these are not enforced by police or traffic authorities.

Speed Limits

10kph is the limit in shared zones including car parks and reserves

40kph is the limit in high pedestrian activity areas (as per the sign above), local traffic areas, school zones at prescribed times and school bus blackspot areas

50kph is the default urban speed limit in built-up areas. It may be signposted if unclear, but if a road has street lights and is urban in the absence of other posted limits it will be 50kph. It may be signposted if unclear.

60kph is the limit on significant urban undivided arterial roads (with direct driveway accesses), divided roads with high volume where the lanes are narrow (less than 3.0 metres), and rural residential roads in villages with minimal development.

80kph is the limit on urban high standard divided roads (generally without driveway access), undivided arterial and sub-arterial roads on the fringes of urban areas and lower quality rural roads, undivided rural roads with less than 5.6 metres wide sealed pavement or no marked dividing line.

100kph is the default rural speed limit and default speed limit for non-built-up areas – urban motorways (freeways/tollways), rural undivided road with sealed pavement wider than 5.6 metres, rural divided roads.

110kph is the maximum allowable speed limit in NSW. Motorways (freeways/tollways) in non-built-up areas, high-quality rural divided roads, undivided rural road with low traffic volume
west of the Newell Highway.

Roadworks have speed limits of 40, 60 or 80kph depending on the road and the type of works.

Unsealed roads are often limited to 80kph

Seasonal zones can have different limits depending on the season (e.g. because of weather conditions or tourist numbers).

Advisory speeds at corners are not speed limits. They are to advise that a certain speed is a safe speed in dry weather.

Zone lengths

Different speed limits have different minimum zone lengths

40kph – 200m

50kph (urban) – no limit

50 or 60kph (signposted) – 500m

70-90kph – 2km

100kph – 3km

110kph – 10km

Types of vehicles and licence classes and their maximum limits

Leaner licence holders: 80 kph

P1 licence holders: 90 kph

P2 licence holders: 100 kph

Road trains: 90 kph (may have a speed limiter fitted)

Other heavy vehicles (i.e. a vehicle with a GVM of over 4.5 tonnes, including B doubles): 100 kph (may have a speed limiter fitted).

Some classes of vehicle will be restricted in certain areas while other vehicles don’t have that restriction. The image above shows that trucks and buses are restricted to 40kph in this zone. Cars and motorbikes are exempt from the restriction and the standard or posted speed limit for that area will apply (for example 50kph).

Tolerance for exceeding the speed limit

Exceeding the speed limit by any speed is technically against the law and you can be fined even if you are doing 1kph over the limit. However, some tolerance is allowed for common sense purposes: there is some variation in speedometer accuracy, a new set of tyres will read a lower speed than a worn set because of the greater circumference, drivers of different heights have a different view of the speedo needle, and it’s not beneficial to encourage drivers to be looking at their speedometer all the time as it means their eyes are diverted from the road.

If you are driving sensibly for the conditions with an appropriate gap to the vehicle in front then it’s unlikely you will stopped and ticketed for a coupe of kilometers per hour over the limit.

There is an undisclosed margin that you are allowed to exceed the limit by. This is sometimes said to be 10% yet at other times 3 or 5kph.

The best way to get an accurate speed reading is to use a GPS.

In reality, all new cars are set to under-read. I.e. if your speedo says you are doing 100kph you are more likely doing around 97kph. This is so that manufacturers avoid multiple law suits from people who thought they were driving within the limit but then get a ticket.